Electric vehicles, workshop over the straddle plant is an electric rail transport vehicles. Has a simple structure and easy to use, easy to maintain: large carrying capacity, no environmental pollution, are widely used in machinery manufacturing and steel industry, shipbuilding, automobile manufacturing, as the workshop with heavy traffic transport over cross-purposes.
Electric vehicles by category can be divided into the following series:
1.KPD series of electric vehicles is a low-powered electric rail flat car, its working principle is down by ground control system, the 380V power supply (three-phase or single-phase) voltage approaching safe voltage of 36V. Feed to the rail (conductor rail flat car take shape doubles the track), the flat car conductive device to the car's low-voltage transformers, step-up to 380V three-phase or single drag the opposite capacitor motors, drives flat car running. Advantages KPD series electric vehicles is due to not only secure the cable, but not afraid of hot, is not afraid to drop, without prejudice to the cross-transport, easy to implement remote control and automation, can travel in the corners, circular track, appropriately increase the number of step-down transformer can not flat car running distance limitations to plant transport plane layout with great convenience.
2.KPX series of electric vehicles is the use of well-known brands of batteries, green. The vehicle is characterized by 48V DC power supply, the charging time is fast, strong discharge capacity. Usually a charge can run uninterrupted for more than 10 hours. The machine easy to install, without distance limitations, not the cable that security without impeding traffic, you can bend, circular trail running long distances, enabling remote control and automation.
3.KPJ Series electric flat car, on the basis of KPT added a cable reels, automatic retractable cable. The car's performance is suitable for running away. Easy to install, simple structure, easy maintenance.
4.KPDZ series of electric vehicles, is changed to high pressure in the KPD series based on the flatcar becomes low pressure, low voltage rectifier output by the low-voltage DC power supply way through. Use simple, safe, low voltage power supply than the advantages of conventional transformer output at a later orbit maximum voltage DC48V, within the safe voltage, this car can bend, long-distance running on a circular orbit, enabling remote control and automation.
The above series of electric vehicles using high-strength structural steel countertops to enhance, transform, easy to maintain, can be prepared steel surfaces, countertops and other rail countertops and grid based on user requirements.
Product performance standards: JB / T6127-2010 << electric vehicles technical conditions >>